Keywords

Latest topics
Welcome to Gokart Bazaar
Hello guest, welcome to the forum. As a guest your access is limited , In order to see the help, how to sections, you need to register. Press this box to jump to the Registration Form. A valid email is needed for registration, in order to receive a verification code to enter the forum. I look forward to you registering
.
Gallery



How to Adjust a Go Kart Clutch

View previous topic View next topic Go down

avatar
BlackScorpion
Admin
Admin
Posts : 858
Join date : 2010-11-05
Location : Englishtown, New Jersey
http://www.gokartbazaar.com

PostBlackScorpion on Tue 15 May 2012, 3:21 pm

This article is from doityourself.com, the original article can be seen here:
[You must be registered and logged in to see this image.]

[You must be registered and logged in to see this image.]

Having a go kart is a fun experience, and adding gears, throttles and clutches is a learning experience in itself. If you are intending to drive your go kart for a race, you might consider that the clutch needs adjusting in order to get the best from your machine. Getting the clutch right is one of the most difficult parts of being a good racer.

Step 1 - Remove the Clutch

Before you start adjusting the clutch, remove it from the break and check the pieces for signs of damage or other problems One of the main problems with go kart clutches is their tendency to stick or lock during drives. If you have just adjusted your clutch so that you are driving more quickly, and a fault causes the clutch to lock suddenly, you may find yourself in an accident, or at least spinning out of the race. Ensure that all the parts inside your clutch are well-greased and able to move freely once back in position. You can then continue to adjusting the clutch.

Step 2 - Get More Slip

If the clutch is not slipping enough when you move out of a turn, you can lose time adjusting the car to the clutch. One way to fix this is to alter the clutch so that it allows you more slipping. Turn the clutch with a wrench so that the oil plugs face 12 and 6 o'clock. You should then remove the plug which is next to 12. Insert an Allen key into the sleeve nut; then turn the engine until you can see this screw. Adjust it by turning clockwise. Turn all the other screws the same amount. Replace the plug and test out your adjustment on the track.

Step 3 - Get Less Slipping


If you find that you have now over-adjusted the clutch, stop the car as soon as you can, and use the Allen key to turn the screws counterclockwise to slightly shy of their original starting place.

You should the test the go kart again to see whether the slippage is now the correct amount. If you are still having trouble, stop the go kart again and use the Allen key to turn the screws slightly more toward their starting point. You should now be all right to drive without excessive slippage.

Repeat this action if you are experiencing too much slippage without having altered the clutch, but you will be turning the screws slightly counterclockwise from their starting position. Always test your go kart after altering the clutch but before you attempt to race it, so that you are in no danger of having an accident.



Read more: [You must be registered and logged in to see this link.]

View previous topic View next topic Back to top

Create an account or log in to leave a reply

You need to be a member in order to leave a reply.

Create an account

Join our community by creating a new account. It's easy!


Create a new account

Log in

Already have an account? No problem, log in here.


Log in

 
Permissions in this forum:
You cannot reply to topics in this forum