Keywords

Latest topics
» Crossfire 150R Wiring Diagram
by BlackScorpion Sat 08 Oct 2016, 6:35 pm

» Basic CDI Wiring Diagram Photo
by BlackScorpion Sat 08 Oct 2016, 6:31 pm

Welcome to Gokart Bazaar
Hello guest, welcome to the forum. As a guest your access is limited , In order to see the help, how to sections, you need to register. Press this box to jump to the Registration Form. A valid email is needed for registration, in order to receive a verification code to enter the forum. I look forward to you registering
.
Gallery



Important Safety Information for Mounting Kart Tires

View previous topic View next topic Go down

avatar
BlackScorpion
Admin
Admin
Posts : 857
Join date : 2010-11-05
Location : Englishtown, New Jersey
http://www.gokartbazaar.com

PostBlackScorpion on Fri 28 Mar 2014, 11:41 pm






Important Safety Information for Mounting Kart Tires





[You must be registered and logged in to see this link.]SAFETY WARNING:

Serious injury or death may result from an explosion of the tire/wheel assembly due to the use of excessive pressure during mounting. Never exceed 35 psi (240 KPA) to seat beads. During tire inflation always have assembly secured, stand clear and use a remote clip-on air hose. Only specially trained persons should mount tires.


 


 



  1. All race kart tires are tubeless. Extra care must be taken to prevent leakage from both the tire and wheel. Always check for damage to the tire bead, O-ring (two-piece wheels) or wheel rim. Use special attention when mounting tires on cast one-piece wheels as any damage to the wheel may lead to a catastrophic failure when mounting.

  2. It is recommended that the tubeless valve “TR412″ be used in all race kart applications.

  3. When mounting tires, always apply lubricant to the bead of the tire and the bead seat area of the wheel. Use extra care when mounting tire on one-piece wheels, as the tire bead is especially susceptible to damage.

  4. The maximum recommended tire seating pressure is 35 psi.

  5. After seating the tire, make sure that the bead of the tire is seated all the way around the circumference of the wheel on both sides.

  6. Once the tire is seated, reduce pressure to 6-21 psi.

  7. To ensure proper mounting, all Bridgestone and Firestone race kart tires display a directional sign on both sides of the tire.

  8. When mounted on the kart axle, both front and rear tires should rotate in the same direction as the arrows (>>) molded into the sidewall.



<

View previous topic View next topic Back to top

Create an account or log in to leave a reply

You need to be a member in order to leave a reply.

Create an account

Join our community by creating a new account. It's easy!


Create a new account

Log in

Already have an account? No problem, log in here.


Log in

 
Permissions in this forum:
You cannot reply to topics in this forum